Skip to content

The Matrice 600 Pro (M600 Pro) inherits everything from the M600 with improved flight performance and better loading capacity.Pre-installed arms and antennas reduce time required for setup, and the system’s modular design makes it easy to mount additional modules.The airframe is equipped with the latest DJI technologies, including the A3 Pro flight controller, Lightbridge 2 HD transmission system, Intelligent Batteries and Battery Management system. Several Zenmuse cameras and gimbals are natively compatible and full integration with third party software and hardware make the M600 Pro ideal for professional aerial photography and industrial applications.



The A3 Pro flight controller has triple modular redundancy and diagnostic algorithims that compare sensor data from three sets of GNSS units, with additional analytic redundancy for a total of six.  A new dampining system for the A3's modulars enable precise control of multi-rotar aircraft, providing accurate data for stable flight performance.  Self-adaptive systems with automatically adjust flight perameters based on different payloads.  Compatibility with D-RTK GNSS means that the A3 Pro can withstand magnetic interference, providing centimeter-level accurancy, suitable for various industrial applications.



The M600 Pro is simple and easy to set up, ready to fly within a matter of minutes.  It's airframe has been optimized for easier transportation with a quick-release landing gear design and folding frame arms.  Under the new upper cover, the position of the GNSS modles and sensors have been revamped and a new dampining system for the IMU units increases reliability during flight.  The M600 Pro also comes with a durable, customizable case that absorbs impact from shakes or falls, providing all-round protection when carried or transported.



Dustproof propulsion systems simplify maintenance and active cooling motors ensure that operation is reliable for extended periods of time. The M600 Pro is natively compatible with several Zenmuse cameras and gimbals. With a maximum payload of 6kg, it effortlessly supports the Ronin-MX gimbal, DJI Focus and a range of cameras from Micro Four Thirds systems to the RED EPIC.



The M600 Pro has an extended flight time and a 5km* long-range transmission. A comprehensive battery management system means that if any of its six Intelligent Batteries are turned on or off, the rest will follow suit. The battery management system monitors every battery during flight, ensuring safe landing in the event of single battery failure. Compared to traditional non-intelligent batteries, the M600 Pro’s battery management system simplifies maintenance while enhancing security.






 Diagonal Wheelbase  1133 mm

 1668 mm × 1518 mm × 727 mm:

 with propellers, frame arms and GPS mount unfolded (including landing gear)

 437 mm × 402 mm × 553 mm:

 with propellers, frame arms and GPS mount folded (excluding landing gear)

 Package Dimensions  525 mm × 480 mm × 640 mm
 Weight (with six TB47S batteries)  9.5 kg
 Weight (with six TB48S batteries)  10 kg
 Max Takeoff Weight Recommended  15.5 kg
 Hovering Accuracy (P-GPS)  Vertical: ±0.5 m, Horizontal: ±1.5 m
 Max Angular Velocity  Pitch: 300°/s, Yaw: 150°/s
 Max Pitch Angle  25°
 Max Wind Resistance  8 m/s
 Max Ascent Speed  5 m/s
 Max Descent Speed  3 m/s
 Max Service Ceiling Above Sea Level

 2170R propellers: 2500 m;

 2195 propellers: 4500 m

 Max Speed  40 mph / 65 kph (no wind)
 Hovering Time* (with six TB47S batteries)  No payload: 32 min, 6 kg payload: 16 min
 Hovering Time* (with six TB48S batteries)  No payload: 38 min, 5.5 kg payload: 18 min
 Supported DJI Gimbals

 Ronin-MX; Zenmuse Z30, Zenmuse X5/X5R, Zenmuse X3, Zenmuse XT;

 Zenmuse Z15 Series HD Gimbal: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4

 Flight Control System  A3 Pro
 Propulsion System

 Motor model: DJI 6010

 Propeller model: DJI 2170R

 Retractable Landing Gear  Standard
 Operating Temperature  14° Fto 104° F (-10° C to 40° C)




 Voltage Output  26.1 V
 Rated Power  600 W
 Single Battery Port Output Power  100 W




 Capacity  5700 mAh
 Voltage  22.8 V
 Battery Type  LiPo 6S
 Energy  129.96 Wh
 Net Weight  680 g
 Operating Temperature  14°F to 104° F (-10°C to 40° C)
 Max Charging Power  180 W




 Operating Frequency  920.6 MHz to 928 MHz (Japan); 5.725 GHz to 5.825 GHz; 2.400 GHz to 2.483 GHz
 Max Transmission Distance  FCC Compliant: 3.1 mi (5 km), CE Compliant: 2.2 mi (3.5 km) (Unobstructed, free of interference)
 Transmitter Power (EIRP)  10 dBm @ 900M, 13 dBm @ 5.8G, 20 dBm @ 2.4G
 Video Output Port  HDMI, SDI, USB
 Operating Temperature  14°F to 104° F (-10° to 40° C)
 Battery  6000 mAh LiPo 2S




 Capacity  4500 mAh
 Voltage  22.2 V
 Battery Type  LiPo 6S
 Energy  99.9 Wh
 Net Weight  595 g
 Operating Temperature  14° F to 104° F (-10°C to 40° C)
 Max Charging Power  180 W