

The Matrice 600 Pro (M600 Pro) inherits everything from the M600 with improved flight performance and better loading capacity.Pre-installed arms and antennas reduce time required for setup, and the system’s modular design makes it easy to mount additional modules.The airframe is equipped with the latest DJI technologies, including the A3 Pro flight controller, Lightbridge 2 HD transmission system, Intelligent Batteries and Battery Management system. Several Zenmuse cameras and gimbals are natively compatible and full integration with third party software and hardware make the M600 Pro ideal for professional aerial photography and industrial applications.
A3 PRO FLIGHT CONTROLLER. SUPERLATIVE PERFORMANCE
The A3 Pro flight controller has triple modular redundancy and diagnostic algorithims that compare sensor data from three sets of GNSS units, with additional analytic redundancy for a total of six. A new dampining system for the A3's modulars enable precise control of multi-rotar aircraft, providing accurate data for stable flight performance. Self-adaptive systems with automatically adjust flight perameters based on different payloads. Compatibility with D-RTK GNSS means that the A3 Pro can withstand magnetic interference, providing centimeter-level accurancy, suitable for various industrial applications.
COMPLETE INTEGRATION ULTRA CONVENIENT
The M600 Pro is simple and easy to set up, ready to fly within a matter of minutes. It's airframe has been optimized for easier transportation with a quick-release landing gear design and folding frame arms. Under the new upper cover, the position of the GNSS modles and sensors have been revamped and a new dampining system for the IMU units increases reliability during flight. The M600 Pro also comes with a durable, customizable case that absorbs impact from shakes or falls, providing all-round protection when carried or transported.
AERIAL IMAGING SOLUTION
Dustproof propulsion systems simplify maintenance and active cooling motors ensure that operation is reliable for extended periods of time. The M600 Pro is natively compatible with several Zenmuse cameras and gimbals. With a maximum payload of 6kg, it effortlessly supports the Ronin-MX gimbal, DJI Focus and a range of cameras from Micro Four Thirds systems to the RED EPIC.
EXTENDED FLIGHT TIME AND TRANSMISSION RANGE
The M600 Pro has an extended flight time and a 5km* long-range transmission. A comprehensive battery management system means that if any of its six Intelligent Batteries are turned on or off, the rest will follow suit. The battery management system monitors every battery during flight, ensuring safe landing in the event of single battery failure. Compared to traditional non-intelligent batteries, the M600 Pro’s battery management system simplifies maintenance while enhancing security.
SPECIFICATIONS
AIRCRAFT
Diagonal Wheelbase | 1133 mm |
---|---|
Dimensions |
1668 mm × 1518 mm × 727 mm: with propellers, frame arms and GPS mount unfolded (including landing gear) 437 mm × 402 mm × 553 mm: with propellers, frame arms and GPS mount folded (excluding landing gear) |
Package Dimensions | 525 mm × 480 mm × 640 mm |
Weight (with six TB47S batteries) | 9.5 kg |
Weight (with six TB48S batteries) | 10 kg |
Max Takeoff Weight Recommended | 15.5 kg |
Hovering Accuracy (P-GPS) | Vertical: ±0.5 m, Horizontal: ±1.5 m |
Max Angular Velocity | Pitch: 300°/s, Yaw: 150°/s |
Max Pitch Angle | 25° |
Max Wind Resistance | 8 m/s |
Max Ascent Speed | 5 m/s |
Max Descent Speed | 3 m/s |
Max Service Ceiling Above Sea Level |
2170R propellers: 2500 m; 2195 propellers: 4500 m |
Max Speed | 40 mph / 65 kph (no wind) |
Hovering Time* (with six TB47S batteries) | No payload: 32 min, 6 kg payload: 16 min |
Hovering Time* (with six TB48S batteries) | No payload: 38 min, 5.5 kg payload: 18 min |
Supported DJI Gimbals |
Ronin-MX; Zenmuse Z30, Zenmuse X5/X5R, Zenmuse X3, Zenmuse XT; Zenmuse Z15 Series HD Gimbal: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4 |
Flight Control System | A3 Pro |
Propulsion System |
Motor model: DJI 6010 Propeller model: DJI 2170R |
Retractable Landing Gear | Standard |
Operating Temperature | 14° Fto 104° F (-10° C to 40° C) |
CHARGER (MODEL: MC6S600)
Voltage Output | 26.1 V |
---|---|
Rated Power | 600 W |
Single Battery Port Output Power | 100 W |
OPTIONAL BATTERY (MODEL: TB48S)
Capacity | 5700 mAh |
---|---|
Voltage | 22.8 V |
Battery Type | LiPo 6S |
Energy | 129.96 Wh |
Net Weight | 680 g |
Operating Temperature | 14°F to 104° F (-10°C to 40° C) |
Max Charging Power | 180 W |
REMOTE CONTROLLER
Operating Frequency | 920.6 MHz to 928 MHz (Japan); 5.725 GHz to 5.825 GHz; 2.400 GHz to 2.483 GHz |
---|---|
Max Transmission Distance | FCC Compliant: 3.1 mi (5 km), CE Compliant: 2.2 mi (3.5 km) (Unobstructed, free of interference) |
Transmitter Power (EIRP) | 10 dBm @ 900M, 13 dBm @ 5.8G, 20 dBm @ 2.4G |
Video Output Port | HDMI, SDI, USB |
Operating Temperature | 14°F to 104° F (-10° to 40° C) |
Battery | 6000 mAh LiPo 2S |
STANDARD BATTERY (MODEL: TB47S)
Capacity | 4500 mAh |
---|---|
Voltage | 22.2 V |
Battery Type | LiPo 6S |
Energy | 99.9 Wh |
Net Weight | 595 g |
Operating Temperature | 14° F to 104° F (-10°C to 40° C) |
Max Charging Power | 180 W |